|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
January 16th, 2006, 03:41
|
#1 |
|
Guarder P226 slide help
Just a simple question...I got the non-black slide/frame, and I'm thinking of going with the 2-tone look for my p226 so i was wondering what's the best way of getting the stainless steel look? Sand off the sandblasted finish then use a clear laquer or wax polish?
All the guarder site says is "You can bright surface of the slide by wax polish.", so I'm unsure if i remove the finish.(link to guarder page just in case http://www.intrudershop.com/show_pro...?idproduct=716 )
__________________
~Per Ardua~ |
|
|
|
January 16th, 2006, 15:00
|
#2 |
|
mag wheels polishing wax would work well. Found at all good cnd tire!
__________________
If you're short of everything except enemies, you're in combat. D.O.W. SEALs Father of fear, reckless and widowmaker |
|
|
|
|
January 16th, 2006, 15:47
|
#3 |
|
I got that frame for my P226, What I did was took a file to all the inner parts and removed all the flash so everything fit and smeared grinding compound on the slide and frame and worked that back & forth until it was smooth (if you do the hard parts first so the fun easy parts are left) and then I took red scotchbrite and "Met all" polish and started sanding / polishing. After everything is smooth I took 1800 grit wet /dry paper to it and sanded the frame in one direction so it has a brushed stainless look. It took a couple evenings but it worked for me. I also put a Pachmyer wrap around grip on to finish it off.
|
|
|
|
|
|
January 16th, 2006, 17:59
|
#4 |
|
|
cool, thanks for the tips guys
__________________
~Per Ardua~ |
|
|
|
 |
|
||||||
| Bookmarks |
| Thread Tools | |
|
|
 |
