Airsoft Canada
http://triggerairsoft.com/shop/

Go Back   Airsoft Canada > Discussion > Doctor's Corner
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

PDI V Trigger and/or PDI cylinder set issue

:

Doctor's Corner

Reply
 
Thread Tools
Old July 26th, 2016, 23:37   #1
redberets44
 
Join Date: Jan 2016
Location: gulag
PDI V Trigger and/or PDI cylinder set issue

So I recently got a WELL L96 in a trade and it has a few upgrades such as a PDI V trigger, a PDI cylinder set, an R hopped barrel, and an action army hop up chamber.

Anyways I believe there is an issue with the trigger or cylinder sets because 6/10 times when I pull the trigger nothing happens, I either have to tap it a bunch of times hoping it would fire or tap it once randomly. It locks back every single time though. Also there is no safety lever, I'm not sure if that's relevant.
redberets44 is offline   Reply With Quote
Old July 26th, 2016, 23:46   #2
ThunderCactus
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
 
ThunderCactus's Avatar
 
Join Date: Feb 2007
Are you sure it's a V-trigger?
ThunderCactus is offline   Reply With Quote
Old July 27th, 2016, 02:08   #3
ShelledPants
 
ShelledPants's Avatar
 
Join Date: Feb 2008
Location: Toronto, On
This could be when the slot of the cylinder rides the sear and causes it to latch but then lock up. I had a similar issue with mine which I remedied by taking a file to the cylinder slot.

NOTE: I have a Mag Cylinder and a Action Army Zero Trigger. But the symptoms are the same.
__________________


Ár skal r?*sa, sá er annars vill
fé eða fjör hafa. Sjaldan liggjandi úlfur
lær um getur né sofandi maður sigur.
ShelledPants is offline   Reply With Quote
Old July 27th, 2016, 02:29   #4
Jamroxorz
Jamroz
 
Join Date: Aug 2011
Location: Brampton Ontario
Try loosening the screw near the trigger guard a bit.
__________________
______________________________________
BA Certified Level 2
Jamroxorz is offline   Reply With Quote
Old July 27th, 2016, 19:16   #5
redberets44
 
Join Date: Jan 2016
Location: gulag
Quote:
Originally Posted by ShelledPants View Post
This could be when the slot of the cylinder rides the sear and causes it to latch but then lock up. I had a similar issue with mine which I remedied by taking a file to the cylinder slot.

NOTE: I have a Mag Cylinder and a Action Army Zero Trigger. But the symptoms are the same.
which area of the cylinder slot?
redberets44 is offline   Reply With Quote
Old July 27th, 2016, 19:22   #6
redberets44
 
Join Date: Jan 2016
Location: gulag
Ok I think I found the problem, the outer barrel turns and the cylinder set turns with it. Any idea how to stop this?
redberets44 is offline   Reply With Quote
Old July 27th, 2016, 22:30   #7
chaz
 
chaz's Avatar
 
Join Date: Jan 2006
Location: Ajax
loctite?
chaz is offline   Reply With Quote
Old July 28th, 2016, 18:31   #8
redberets44
 
Join Date: Jan 2016
Location: gulag
well turns out that wasn't the issue, I did find out how to tighten the outer barrel though
redberets44 is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Doctor's Corner

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
http://triggerairsoft.com/shop/

All times are GMT -4. The time now is 19:04.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.