WE G18 Gen4 A1A Sailent kit bbs just roll out of the barrel

[DC_ACU]

Hey guys, Haven't had to ask for help with anything gas related forever. I've extensively searched google, but I don't think I'm wording the problem correctly.

My issue is this (and hopefully resolvable by tomorrow so I can 1V1 pistol match my buddy)

I recently bought said WE Glock 18 Gen 4, bought the Ace 1 Arms Sailent kit, installed it, cycles nicely, feels great. etc.

I threw a few bbs in the mag to test fire it and they either get jammed, or just roll out of the barrel. I've taken the slide apart about 15 times in the last day, making sure everything is installed tightly, lubricated well and most importantly lined up straight.

The only problem I thought it may have been is the spring that retains the piston when the slide racks. I thought it may have been clumped up from the way it has to be installed, but after numerous attempts, I figured it has to be in there straight, or it's physically impossible to tell.

PLEASE any help would be greatly appreciated, I only have maybe 16 hours to try and get it working before I'll have to wait another couple weeks.

[Kungpow]

Originally Posted by DC_ACU

Hey guys, Haven't had to ask for help with anything gas related forever. I've extensively searched google, but I don't think I'm wording the problem correctly.

My issue is this (and hopefully resolvable by tomorrow so I can 1V1 pistol match my buddy)

I recently bought said WE Glock 18 Gen 4, bought the Ace 1 Arms Sailent kit, installed it, cycles nicely, feels great. etc.

I threw a few bbs in the mag to test fire it and they either get jammed, or just roll out of the barrel. I've taken the slide apart about 15 times in the last day, making sure everything is installed tightly, lubricated well and most importantly lined up straight.

The only problem I thought it may have been is the spring that retains the piston when the slide racks. I thought it may have been clumped up from the way it has to be installed, but after numerous attempts, I figured it has to be in there straight, or it's physically impossible to tell.

PLEASE any help would be greatly appreciated, I only have maybe 16 hours to try and get it working before I'll have to wait another couple weeks.

It makes sense that this is a nozzle issue. The nozzle should be feeding and propelling the bbs. (Please Look At The Link Below.)

http://www.airsoftcanada.com/showthread.php?t=176340

[DC_ACU]

Big thanks Kungpow, Still having a bit of issue with it cycling, but I'll figure it out over the next few days. Cancelled going out today.

[pestobanana]

Replace the floating valve inside the nozzle with the stock one. The A1A one is the incorrect size and gets stuck in the forward position.