upgrade for KWA MP7

heman90210 · June 21st, 2015, 22:28

Hi, I have the KWA MP7 Sub machine airsoft gun. The gun is a H&K airsoft blow back gas replica. I think It's brilliant, but, the full automatic feature is lacking. I have never been able to finish a full clip on automatic fire without the gun malfunctioning. After two shots It will release all the green gas out from the magazine.

I took it to airsoft tech at trigger airsoft in Richmond. He said that was normal because when gas expands, it cools further and that make the mag too cold to function.

I know that KWA makes good guns as I also have a KWA Kriss vector as my primary. So I wanna know is there any internal upgrade ,or attachments, I could utilize to allow full functionality at full Automatic fire?

hollywood... · June 21st, 2015, 22:30

what do you need automatic fire for?

Rossco66 · June 21st, 2015, 23:41

That's definitely not normal. Not sure why you need a mag dump anyway but burst firing my MP7 and I can get more than two mags through one gas charge.

Danke · June 22nd, 2015, 00:01

Put in a tightbore barrel an a new hopup rubber an you're good to go.

The KWA MP7 is a KISS piece of kit.

heman90210 · June 22nd, 2015, 01:46

Thx for your input guys. To answer some of your questions; I don't need full auto fire, but I want full auto fire. You could use full auto fire to suppress fire on target and allow a teammate or fellow soldier to advance position. It also works great when combined with a grenade. Although I used to be a soldier for the Canadian forces so I can get by fine on semi auto. Anyway, if I wanted a semi fire only weapon, I would have bought a pistol like a Glock or 6p9.

So I am to understand that my inner barrel and hop up are inefficient? Do you recommend anything? Brands?

Rossco66 · June 22nd, 2015, 10:20

Try the A+ REAPS, although the last batch seemed to have some issues with them. Required a bit of teching to get it running properly. My stock barrel is accurate to about 135 feet using .32s with Green Gas. I can reach much further than that but I can only reliably hit a 9" pie plate at about 135. Although that is from standing position.

Danke · June 22nd, 2015, 11:46

I like the Falcon bucking.

Falcon and PDI both make good barrels.

heman90210 · June 23rd, 2015, 19:16

Great, I ordered a precision falcon inner barrel. Still undecided on which rubber bucking hop up to get. Thx for the info guys

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

June 21st, 2015, 22:28	#1
heman90210 Trader rating Join Date: Oct 2014	upgrade for KWA MP7 Hi, I have the KWA MP7 Sub machine airsoft gun. The gun is a H&K airsoft blow back gas replica. I think It's brilliant, but, the full automatic feature is lacking. I have never been able to finish a full clip on automatic fire without the gun malfunctioning. After two shots It will release all the green gas out from the magazine. I took it to airsoft tech at trigger airsoft in Richmond. He said that was normal because when gas expands, it cools further and that make the mag too cold to function. I know that KWA makes good guns as I also have a KWA Kriss vector as my primary. So I wanna know is there any internal upgrade ,or attachments, I could utilize to allow full functionality at full Automatic fire?

June 21st, 2015, 22:30	#2
hollywood... cranky old man Trader rating Join Date: Sep 2010 Location: In a Van,.... Down by the River!	what do you need automatic fire for? __________________ MODT - tu fui ego eris

June 21st, 2015, 23:41	#3
Rossco66 Trader rating Join Date: Aug 2013 Location: Burlington, Ontario	That's definitely not normal. Not sure why you need a mag dump anyway but burst firing my MP7 and I can get more than two mags through one gas charge. __________________

June 22nd, 2015, 00:01	#4
Danke Prancercise Guru Trader rating Join Date: Oct 2007 Location: Danger Zone	Put in a tightbore barrel an a new hopup rubber an you're good to go. The KWA MP7 is a KISS piece of kit. __________________ Airsoft, where nothing is hurt but feelings.

June 22nd, 2015, 01:46	#5
heman90210 Trader rating Join Date: Oct 2014	Thx for your input guys. To answer some of your questions; I don't need full auto fire, but I want full auto fire. You could use full auto fire to suppress fire on target and allow a teammate or fellow soldier to advance position. It also works great when combined with a grenade. Although I used to be a soldier for the Canadian forces so I can get by fine on semi auto. Anyway, if I wanted a semi fire only weapon, I would have bought a pistol like a Glock or 6p9. So I am to understand that my inner barrel and hop up are inefficient? Do you recommend anything? Brands? Last edited by heman90210; June 22nd, 2015 at 01:49..

June 22nd, 2015, 10:20	#6
Rossco66 Trader rating Join Date: Aug 2013 Location: Burlington, Ontario	Try the A+ REAPS, although the last batch seemed to have some issues with them. Required a bit of teching to get it running properly. My stock barrel is accurate to about 135 feet using .32s with Green Gas. I can reach much further than that but I can only reliably hit a 9" pie plate at about 135. Although that is from standing position. __________________

June 22nd, 2015, 11:46	#7
Danke Prancercise Guru Trader rating Join Date: Oct 2007 Location: Danger Zone	I like the Falcon bucking. Falcon and PDI both make good barrels. __________________ Airsoft, where nothing is hurt but feelings.

June 23rd, 2015, 19:16	#8
heman90210 Trader rating Join Date: Oct 2014	Great, I ordered a precision falcon inner barrel. Still undecided on which rubber bucking hop up to get. Thx for the info guys

upgrade for KWA MP7

Upgrades & Modifications