Ares M110 - standard Ares M4 gearbox?

dizzale21 · March 17th, 2015, 15:16

Can anyone confirm whether the Ares M110 will take a standard Ares M4 Gearbox, like the one in the link below?:

http://shop.ehobbyasia.com/ares-m4-m...l#.VQhu9ELVr9E

My Google-fu has told me that the box in the M110 is a standard V2 (thus eliminating the need for an SR-25 length nozzle - this is also why the mags are proprietary), but that there are fitment issues with standard V2 boxes... so I figured I'd play it safe and stick with an Ares one. Ares customer service is being painfully slow with their replies, so I'm hoping someone else out there can help out.

Cheers.

HKGhost · March 17th, 2015, 16:14

Yea, the gearbox is a standard V2 gearbox shape, so a normal gearbox should fit, but this is airsoft, so it might need some work.

Danke · March 17th, 2015, 16:21

Have you thought about a P*?

It's real close to a common V2 but I can't say for sure how the fit is. When I started my Ares quest (SR25) the easiest fix wast to buy a spare gun, run it, and wait on the parts (tappet plate and hopup).

Then 2 years later sell the B rifle.

These are the guys that got the parts in stock eventually.

http://www.uncompany.com/

I also need an upper receiver that a couple years straight from Ares and when it arrived it was cracked; they don't QC check stuff till after the gun if fully assembled.

So that was my first and last go around with Ares. Even if they made something so amazing and desirable that was at the top of my wish list I can't see myself buying anything from them again.

Foxer2373 · March 17th, 2015, 21:08

I would assume it would not quite fit up as its the 7.62 format and the hopup would not mesh up and still feed propperly. Ahh the SR25 fun, I built mine from the A&K body and the L85 parts for the most part worked perfect and the ones that didn't the CA advanced SR25 parts did. R hoped and used a PSG1 barrel 6.03 barrel and it was a great gun till I sold it and bought a new PTW.

dizzale21 · March 18th, 2015, 12:50

Thanks for your replies, gents.

Update from ARES responding to a Facebook message: a standard ARES M4 gearbox will work - there is no M110 specific gearbox. Other brands of V2 boxes will work with some fitment modifications required, but I'm going to play it safe and just go with the ARES box.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

March 17th, 2015, 15:16	#1
dizzale21 Trader rating Join Date: Apr 2010 Location: Vancouver, BC	Ares M110 - standard Ares M4 gearbox? Can anyone confirm whether the Ares M110 will take a standard Ares M4 Gearbox, like the one in the link below?: http://shop.ehobbyasia.com/ares-m4-m...l#.VQhu9ELVr9E My Google-fu has told me that the box in the M110 is a standard V2 (thus eliminating the need for an SR-25 length nozzle - this is also why the mags are proprietary), but that there are fitment issues with standard V2 boxes... so I figured I'd play it safe and stick with an Ares one. Ares customer service is being painfully slow with their replies, so I'm hoping someone else out there can help out. Cheers. Last edited by dizzale21; March 17th, 2015 at 15:18..

March 17th, 2015, 16:14	#2
HKGhost Trader rating Join Date: Nov 2009 Location: Mississauga, ON	Yea, the gearbox is a standard V2 gearbox shape, so a normal gearbox should fit, but this is airsoft, so it might need some work. __________________ Please email me as I'm not on ASC too often. Custom Build \| Upgrades \| Repairs \| Maintenance Contact: ghostgunwork@gmail.com / Private Message

March 17th, 2015, 16:21	#3
Danke Prancercise Guru Trader rating Join Date: Oct 2007 Location: Danger Zone	Have you thought about a P? It's real close to a common V2 but I can't say for sure how the fit is. When I started my Ares quest (SR25) the easiest fix wast to buy a spare gun, run it, and wait on the parts (tappet plate and hopup). Then 2 years later sell the B rifle. These are the guys that got the parts in stock eventually. http://www.uncompany.com/ I also need an upper receiver that a couple years straight from Ares and when it arrived it was cracked; they don't QC check stuff till after the gun if fully assembled. So that was my first and last go around with Ares. Even if they made something so amazing and desirable that was at the top of my wish list I can't see myself buying anything from them again. __________________ Airsoft, where nothing is hurt but feelings.*

March 17th, 2015, 21:08	#4
Foxer2373 Trader rating Join Date: May 2011 Location: Smith Falls ON	I would assume it would not quite fit up as its the 7.62 format and the hopup would not mesh up and still feed propperly. Ahh the SR25 fun, I built mine from the A&K body and the L85 parts for the most part worked perfect and the ones that didn't the CA advanced SR25 parts did. R hoped and used a PSG1 barrel 6.03 barrel and it was a great gun till I sold it and bought a new PTW.

March 18th, 2015, 12:50	#5
dizzale21 Trader rating Join Date: Apr 2010 Location: Vancouver, BC	Thanks for your replies, gents. Update from ARES responding to a Facebook message: a standard ARES M4 gearbox will work - there is no M110 specific gearbox. Other brands of V2 boxes will work with some fitment modifications required, but I'm going to play it safe and just go with the ARES box.

Ares M110 - standard Ares M4 gearbox?

Upgrades & Modifications