|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
March 11th, 2015, 20:14 | #1 |
The last 5% (hopup issues)
Hey all
So I am 95% there with this build but am having some hop issues. Its a socom gear mk18. Its got a pretty much completely upgraded gearbox. Magic box cylinder, lonex head, SHS nozzle, SHS 13:1 gears, delayer clip, SHS piston, Magic box piston head, sorbo, M110 spring, mosfet, 16 AWG, matrix 3000 motor, and perhaps most importantly a prowin hopup with a maple leaf 75 degree bucking and nub. What I'm finding is that the first 10-15 bbs go maybe 30 ft at low velocity then its like the hop up seats correctly and the rest goes perfectly. When I just keep it jammed back against the gearbox with the screw the bbs won't feed correctly. Any ideas how I can resolve this? Thanks!
__________________
Keep your friends close ... and your enemies dead |
|
March 11th, 2015, 20:21 | #2 |
May be a mag/BB compatibility issue.
__________________
|
|
March 11th, 2015, 20:38 | #3 |
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
|
Sounds like the mags can't push the heavy BBs
|
March 11th, 2015, 20:51 | #4 |
Load 15 bb's. Do you still get the range issue off the bat?
|
|
March 11th, 2015, 21:02 | #5 |
Privateer Airsoft
|
__________________
I change primaries like other people change socks. |
March 12th, 2015, 23:52 | #6 |
problem seems resolved for now. I realized the spacer at the end of my barrel had shifted and was no longer supporting my barrel causing a misalignment.
__________________
Keep your friends close ... and your enemies dead |
|
|
Bookmarks |
Thread Tools | |
|
|