|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
March 1st, 2015, 17:25 | #1 |
WE 500-fps upgrade nozzle for G39C?
Has anyone used one of these before? I'm wondering if it's worthwhile to buy and install one on the DMR build I'm doing on my G39C GBB, or if the difference in power is negligible at best. Scoured the net for some answers from people who have experience using the upgraded nozzle, but came up empty. All I could find were advertisements and "reviews" from Evike sales reps.
Looking for an honest comparison between the stock nozzle and the "500-fps" kit. Thanks for reading, any commentary or input is appreciated. |
|
March 1st, 2015, 18:02 | #2 |
You can cut your own nozzle and it will shoot 500fps.
__________________
WE M14 GHK AKMS APS 870 |
|
March 1st, 2015, 20:33 | #3 |
I thought that modifying a stock one may be possible... Can you elaborate on the process at all, or point me towards a guide maybe? I have two stock nozzles so i would love to try it out on one.
Thanks for the reply. |
|
March 2nd, 2015, 12:24 | #4 |
You have to shave the rear section of the nozzle that hold the valve in place.
Idealy, the holes in the valve are lined with the rear of the nozzle gaz port. In the G36, it usually means cut the two prongs flush and then cut out some ports to let the gaz trigger the blowback. http://en.ratech.com.tw/img/teaching..._Locker_65.jpg |
|
March 3rd, 2015, 01:38 | #5 |
Thanks man. Looks like a pretty simple mod; i'm going to give it a try and see how it works out. Appreciate the advice and for referring me to that image, you da best guys
|
|
|
Bookmarks |
Thread Tools | |
|
|