|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
August 26th, 2014, 23:16
|
#1 |
|
Upgrading my G&G TR16A3 with a m150 spring
I want to put a M150 spring in my G&G TR16A3 Top Tech and I was wondering if I needed to replace my gears and piston I know I need a new motor but I am hoping to keep my stock gears as I dont want to spend that much for all these upgrades.
|
|
|
|
|
August 26th, 2014, 23:25
|
#2 |
|
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
|
keep them until they break.
As long as you're using a good high torque motor and 7.4 or 11.1v lipo, should pull it no problem |
|
|
|
|
August 27th, 2014, 22:20
|
#3 |
|
I bet my gears and piston are good enough anyway I only plan to fire in semi auto anyways and I will probably upgrade the rest of my internals in the future. But do you thing that my 9.6v 5000 mAh battery will be good enough I know that the Lipos will give me better trigger response but I am just wondering
|
|
|
|
|
|
August 27th, 2014, 22:55
|
#4 |
|
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
|
A 7.4v lipo won't give you better trigger response
Because you're using large cells, they should definitely have enough amperage to pull that spring without a problem And if you don't already have a mosfet installed, get one installed when you change your spring, otherwise you'll be melting your trigger contacts |
|
|
|
 |
|
||||||
| Bookmarks |
| Thread Tools | |
|
|
 |
|
