KWA USP Nozzle Spring

pestobanana · June 9th, 2013, 22:42

I'm an AEG guy, so when it comes to gas guns I'm pretty clueless.

I was wondering why my nozzle wasn't retracting like it used to, and I took my gun apart and found a broken spring. I assume the spring is what pulled the nozzle back, but is it necessary? I ask this because my USP is stil cycling without problems and shooting fine. The condition of the spring tells me it was probably like this for a while and I didn't notice.

Styrak · June 10th, 2013, 02:30

Yes, to cycle reliably you need a nozzle spring.

pestobanana · June 11th, 2013, 15:14

Well I guess I know what I'll be picking up next time I'm in Duy's neighbourhood. Are springs for S7 and non S7 guns the same? I'm seeing a spring set that says for KSC and KWA USP's but does not specify which system.

http://www.airsoftparts.ca/store2/in...oducts_id=1847

voorhees -FWA- · June 11th, 2013, 18:45

Check out http://store.kwausa.com/
The right side will show you the exploded diagram of your gun.

pestobanana · June 11th, 2013, 20:09

Hmmm the springs do look different, I'll order from KWA then, thanks

BennyBoy · June 11th, 2013, 20:24

did they change the valve inside? The springs are required to be taken off in order to install it. After you take them off, they may need to be superglued in order to stay in place. I'm buying a broken KWA USP shortly, may have extra springs for you

pestobanana · June 11th, 2013, 21:20

The image on AirsoftParts may just be a generic image, but it doesn't have these in the picture and I'm pretty sure its what I need.

When are you buying the broken USP? If you do have some spare springs I'd be glad to pay you a few dollars for the ones I need. I'm in no hurry to get them because my USP is still cycling without issue.

BennyBoy · June 12th, 2013, 02:44

I'll have to message him again, sorry took so long to reply. Movie with family

It's an older KWA USP so should be same spring and hopefully it can convert my tact to a regular usp

Bellerophon · June 12th, 2013, 18:35

Having this exact problem on my M93R: one of the return springs is wrecked, however the KWA online store only seems to ship to the US. I believe all NS2 guns share the same pair of return springs.

voorhees -FWA- · June 12th, 2013, 20:25

Call them from the Contact page, talk to a tech, pay for it by CC or the like and they will ship. Takes a while, usually 2+ weeks.

shelcoof · June 18th, 2013, 16:30

All System 7 Nozzle return springs from my experience are all the same.
Applies to All USP, HK45, Sig P226, Sig Pro 2022.
Not the same as Glock 17 and Glock 18c return springs as those are different.

Open a ticket and place an order with KWA Proshop no need to call. Do it via pm

lurkingknight · June 18th, 2013, 18:24

you'll end up having to call to give them payment information anyways, I would not trust sending credit card info over email. Last time I checked they didn't accept paypal. Good bunch of customer service folks over there at kwa, they'll take care of you.

K3vX · June 19th, 2013, 00:15

Ive ordered recently by sending a ticket to them, everything went fine, so you can try if you don't want to phone.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

June 9th, 2013, 22:42	#1
pestobanana Squid Porn Superstar, I love the tentacles! Trader rating Join Date: Nov 2008 Location: Richmond Hill and Waterloo, Ontario	KWA USP Nozzle Spring I'm an AEG guy, so when it comes to gas guns I'm pretty clueless. I was wondering why my nozzle wasn't retracting like it used to, and I took my gun apart and found a broken spring. I assume the spring is what pulled the nozzle back, but is it necessary? I ask this because my USP is stil cycling without problems and shooting fine. The condition of the spring tells me it was probably like this for a while and I didn't notice.

June 10th, 2013, 02:30	#2
Styrak Trader rating Join Date: Jan 2007 Location: Saskatoon, SK	Yes, to cycle reliably you need a nozzle spring. __________________ Airsoft Sales and Repair/Upgrade Services

June 12th, 2013, 18:35	#9
Bellerophon Trader rating Join Date: Aug 2012 Location: Guelph, On	Having this exact problem on my M93R: one of the return springs is wrecked, however the KWA online store only seems to ship to the US. I believe all NS2 guns share the same pair of return springs. __________________ Airsoft is where expensive things go to die.

June 11th, 2013, 15:14	#3
pestobanana Squid Porn Superstar, I love the tentacles! Trader rating Join Date: Nov 2008 Location: Richmond Hill and Waterloo, Ontario	Well I guess I know what I'll be picking up next time I'm in Duy's neighbourhood. Are springs for S7 and non S7 guns the same? I'm seeing a spring set that says for KSC and KWA USP's but does not specify which system. http://www.airsoftparts.ca/store2/in...oducts_id=1847

June 11th, 2013, 18:45	#4
voorhees -FWA- Trader rating Join Date: Oct 2008 Location: Estevan, Saskatchewan	Check out http://store.kwausa.com/ The right side will show you the exploded diagram of your gun.

June 11th, 2013, 20:09	#5
pestobanana Squid Porn Superstar, I love the tentacles! Trader rating Join Date: Nov 2008 Location: Richmond Hill and Waterloo, Ontario	Hmmm the springs do look different, I'll order from KWA then, thanks

June 11th, 2013, 21:20	#7
pestobanana Squid Porn Superstar, I love the tentacles! Trader rating Join Date: Nov 2008 Location: Richmond Hill and Waterloo, Ontario	The image on AirsoftParts may just be a generic image, but it doesn't have these in the picture and I'm pretty sure its what I need. When are you buying the broken USP? If you do have some spare springs I'd be glad to pay you a few dollars for the ones I need. I'm in no hurry to get them because my USP is still cycling without issue.

June 12th, 2013, 20:25	#10
voorhees -FWA- Trader rating Join Date: Oct 2008 Location: Estevan, Saskatchewan	Call them from the Contact page, talk to a tech, pay for it by CC or the like and they will ship. Takes a while, usually 2+ weeks.

June 18th, 2013, 16:30	#11
shelcoof Trader rating Join Date: Jul 2011	All System 7 Nozzle return springs from my experience are all the same. Applies to All USP, HK45, Sig P226, Sig Pro 2022. Not the same as Glock 17 and Glock 18c return springs as those are different. Open a ticket and place an order with KWA Proshop no need to call. Do it via pm

June 18th, 2013, 18:24	#12
lurkingknight "bb bukakke" KING! Trader rating Join Date: Jul 2011 Location: Ottawa	you'll end up having to call to give them payment information anyways, I would not trust sending credit card info over email. Last time I checked they didn't accept paypal. Good bunch of customer service folks over there at kwa, they'll take care of you. __________________ I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know.

June 19th, 2013, 00:15	#13
K3vX Trader rating Join Date: May 2012 Location: Quebec City	Ive ordered recently by sending a ticket to them, everything went fine, so you can try if you don't want to phone.

KWA USP Nozzle Spring

Doctor's Corner