Hey everyone, I've seen some guides already on this forum (guides which I'm happy I found because ultimately they helped in making mine), but I figured I'd share some mods I've done to my WinGun .357, more specifically a power mod and accuracy mod. Also, the tools I used work, however if you have better tools (such as a lathe) you'll be able to do them a lot easier.
So I tried copying them over from the original forum I posted them on, however the pictures aren't showing up. So instead here's a link to the forum there currently on (sorry, I would've rather posted them correctly, but the pictures are important).
http://www.airsoftsociety.com/forums...ver-mod-72080/
Anyway, the first one on page one is the power mod, basically it allows to to adjust the FPS of the revolver. either up or down. I've seen people doing different versions of this mod, but I figured this way was pretty easy.
Then over on page 3 of that thread you'll see my accuracy mod. Basically I swapped the stock barrel out with an AEG one, then installed a fixed R-hop.
If anyone has questions, please ask away, I'll try to help anyway possible. These mods are fairly easy (depending on your tool still) but really make a nice improvement of your otherwise un-gameable revolver. Eventually I'll update with results (mostly about the accuracy mod). Thanks for checking out my guide
March 13th, 2013, 00:29
