WE M4 AEG Bolt Catch Problem (Help)

[Knocturnal]

I had to rear wire my gearbox so that I can install my ris rail. After re-wiring I closed my gear box and installed everything back into place. However when I tried the bolt catch it just wasn't working. I pull the charging handle, the dust cover opens and the bolt slips back and holds into place. When I press the bolt release it doesn't work anymore. So I took the gun apart, and gearbox, I then realized that the little spring that works with the lever was messed up. Is there anyway to fix this?

[Styrak]

Get a new spring?

[Knocturnal]

I have thought about that, but it doesn't seem like a standard spring or something I can even find online. Here are some pictures just to make sure were all on the same page about what I'm talking about.

[HKGhost]

If it's not common, then you'll have to make it. Try emailing WE and asking them to sell you a spare.

[Knocturnal]

I pulled out the lever that passed through the gearbox, which by doing so ripping out the spring. Problem solved... There is no real issue that appeared from doing so.