|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
June 15th, 2005, 18:38
|
#1 |
|
WA custom hiflow valves
http://www.wgcshop.com/pcart/shopper...CP-8141_srch_1
Anyhone try these out yet? Are they any different than the guarder ones? Seems everyone makes a WA hiflow these days... |
|
|
|
June 15th, 2005, 19:08
|
#2 |
|
I'm willing to bet that a hi-flow is a hi-flow. Just like in the car tuning scene everyone worries about what brand of cold-air intake to get, when really they all work the same (K&N, AEM, etc). You could also custom port the stock valve with a dremel, I have done it myself and it worked great. Hope that helps.
__________________
...and she's terribly partial to the periwinkle blue. |
|
|
|
|
|
June 15th, 2005, 19:20
|
#3 |
|
Delierious Designer of Dastardly Detonations
    Join Date: Dec 2001
Location: in the dark recesses of some metal chip filled machine shop
|
dunno.
The round side ports look to be the same diameter as stock valves. The only thing different I see is a smaller valve stem. The guarder ones have wide open side ports and necked down stems. They're cheaper too at $18, but they don't come with the tool.
__________________
Want nearly free GBB gas?  |
|
|
|
|
June 15th, 2005, 21:22
|
#4 |
|
but they come in a pimp red! heck i usually used a strong pair of forcepts or pliers and some cloth to prevent scratching to get my valves out.
my pistol would probably be banned if i installed one of those since I can already get 350fps on a warm day without one |
|
|
|
|
|
June 30th, 2005, 04:03
|
#5 |
|
the preformance of the WA should be more stable than the guarder one. however my JAP knowledge read that it is only compatible to new WA mag and not backwards compatible..................I'll buy one tonight to test out the results.
If you want to know the results, PM me then |
|
|
|
|
 |
|
||||||
| Bookmarks |
| Thread Tools | |
|
|
 |
|
