|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
January 12th, 2012, 08:41 | #1 |
Mag seal
Good morning everyone,
I'm trying to find were can i order the rectangular seal for a WE M4 magazine(open bolt) Thanks for your help. Uzzi |
|
January 12th, 2012, 09:38 | #2 |
Hey if you haven't seen it already check out the mag sealing guide in my signature. You don't necessarily need to replace the rubber gasket but instead could fashion a replacement easily and with little expense using gasket maker.
The guide is a bit dated and there are some things I need to update in there once I've got some time but there is some good info in there. Just pick up some Black Gasket Maker like this stuff: Amazon.com: Permatex 82180 Ultra Black Maximum Oil Resistance RTV Silicone Gasket Maker - 3.35 oz.: Automotive You can find it at Canadian Tire for cheap. |
|
January 12th, 2012, 10:43 | #3 |
So, is the black sealant not prone to breakdown like the blue one?
|
|
January 12th, 2012, 12:44 | #4 |
When I last spoke to Zong, my understanding is that the black sealant is tougher than the blue one.
I've sealed my mags with the black gasket maker disregarding the rectangular seals. Haven't experienced any problems. Just be patient to give it time to cure before pressurizing the mag. |
|
January 12th, 2012, 23:19 | #5 |
so you just trow away the old seal??? Sound good to me.
Thanks Uzzi |
|
January 12th, 2012, 23:23 | #6 |
I have just read your post, i will keep the seal..lol
Uz |
|
January 13th, 2012, 01:15 | #7 | |
thanks man
Quote:
|
||
January 13th, 2012, 13:11 | #8 |
hey guys, sorry for the double post, but check this out. the grey version is fuel proof!
http://www.canadiantire.ca/AST/brows....jsp?locale=en |
|
January 13th, 2012, 15:19 | #9 |
will always be Mike Litoris in our hearts
|
I swear by Zong's method. I've used it to seal up many a mag with great success.
|
January 14th, 2012, 00:51 | #10 |
Yep +1 to Zong, used to use regular seal, changed for this one and it's a lot better. Propane doesn't eat it as much.
|
|
January 15th, 2012, 11:55 | #11 |
Z0ng, YOU ROCK! you helped take my m945 from out of action, to game ready over night (had it next to the heater to help dry internals). I know this wasn't my OP, but thanks all!
|
|
|
Bookmarks |
Thread Tools | |
|
|