|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
August 25th, 2010, 15:34 | #1 |
Upgrading VFC
So i know VFC are overall good quality guns.
I own a VFC sopmod m4 and every time i look at the hopup, it scares me a little. simply for the fact that's its plastic clear. So I'm wondering if i should ease my mind and buy myself a http://www.airsoftparts.ca/store2/in...oducts_id=1582 (best one on the marker up to now right?) Or is the plastic clear VFC hopup really good enough that i shouldn't worry about it? thanks againnn~ |
|
August 25th, 2010, 15:59 | #2 |
I wouldn't worry. The plastics that VFC use are pretty good, and this one should hold out for you for quite a while. No sense replacing something that works just fine. If anything, check compatability and keep a spare one handy for those just in case moments.
|
|
August 25th, 2010, 16:03 | #3 |
Good point. thanks ^^
|
|
August 25th, 2010, 17:34 | #4 |
Prancercise Guru
|
If you want a nice chamber get this one. http://www.airsoftparts.ca/store2/in...oducts_id=1348
Otherwise as noted the clear one is fine, your goggle lens is most likely clear and it does it's job. One thing I like about the clear ones is you can actually look in them and get a visual that all is working as it should.
__________________
Airsoft, where nothing is hurt but feelings. |
|
Bookmarks |
Thread Tools | |
|
|