Newbie Questions and Tips of the Week - 08-17-2010

[m102404]

Here's a quick list of the repetitive newbie questions for the week. If you ask these questions you'll most likely have a bunch of guys slag you and drift off on some tangent about masturbation and you'll never get your answer.

1. Most AEGs come with a HiCap mag (hollow mag that you pour BBs into). It has a wheel at the bottom of it that needs to be wound up EVERY time you put it into your rifle, otherwise it won't feed BBs.

2. If you're working on your mechbox and take the cylinder out...the port always goes to the rear of the mechbox (except maybe the MP5K...can't remember).

3. If you buy something and THEN post up wondering if other people think they're good parts/things...what's the point? Why not ask first...then see if the comments affect your decision.

4. You might want a sniper...but a sniper is a person who snipes...a sniper rifle is the weapon a sniper uses. Sniping in airsoft may not be a lot of fun for newcomers to the game.

5. Ordering an airsoft gun from outside of Canada is still a no-no. Chances are that it'll get seized. Driving one back in the trunk of your car is a no-no...a note against your name on the governments records last a long time.

6. There is no way to skirt around the Age Verification system for this site to gain access to the classifieds/retailers (on this site). You MUST meet someone and show photo ID. It is NOT instantaneous...be prepared to wait a couple of days/weeks. Other members WILL get infractions if they try to help someone get around the AV system.

[-Trooper-]

Should be a sticky

[m102404]

Nah...then no one would find/read it. If I get the chance I'll do one up for each week.

[coach]

Are you a tad bored at work or are you just back on ASC more regularly now?

[pusangani]

Originally Posted by coachster

Are you a tad bored at work or are you just back on ASC more regularly now?

was gonna say the same thing

[Short Round]

Originally Posted by m102404

Here's a quick list of the repetitive newbie questions for the week. If you ask these questions you'll most likely have a bunch of guys slag you and drift off on some tangent about masturbation and you'll never get your answer.

2. If you're working on your mechbox and take the cylinder out...the port always goes to the rear of the mechbox (except maybe the MP5K...can't remember).

Thanks

[m102404]

it was this...or start into 3rd draft of a memo

[coach]

Originally Posted by m102404

it was this...or start into 3rd draft of a memo

How long is this memo? lol