|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
June 25th, 2010, 10:53 | #1 |
hates all f'n Americans
|
Which Barrel to get?
EDIT: Thanks for all the info guys!
I am looking at replacing my stock barrel in my G&G M4-CQB/R. G&G says it has at 275mm barrel, but I have a silencer attached, so I can go up to a 363mm. I am looking at the barrels on www.airsoftparts.ca and they have 4 there. Was hoping for some feedback on which one is a better barrel. Option 1: Mad Bull 6.01mm Ultimate Tightbore Barrel - 363mm Option 2: MA 6.03mm Stainless Tightbore 363mm Option 3: Prometheus 6.03 Stainless Tightbore 363mm Option 4: Systema 6.04mm Precision Inner Barrel - 363mm Thanks for all the help guys!
__________________
"Sero Sed Serio"
Last edited by moz_boz; June 28th, 2010 at 11:23.. |
June 25th, 2010, 11:49 | #3 |
I am manly hear me squeek
|
Hey moz Go Prometheus you wont be sorry and +1 to LastSpartan's Comment about the rubber
__________________
|
June 25th, 2010, 11:49 | #4 |
hates all f'n Americans
|
Which Promy rubber? The hard one or the soft one?
__________________
"Sero Sed Serio"
|
June 25th, 2010, 11:50 | #5 |
Prometheus. Clean the barrel first before installing it into your gun.
|
|
June 25th, 2010, 11:54 | #6 |
I am manly hear me squeek
|
I would go with the Hard rubber for higher velocities the soft ones are usually used in below 350FPS guns someone correct me if im wrong
__________________
|
June 25th, 2010, 17:49 | #7 |
Hard rubber (red) for above 450 fps, soft (purple) for under that.
|
|
|
Bookmarks |
Thread Tools | |
|
|