laser adjustment

[heman90210]

I recently bought a pressure switch laser for my KWA Kriss vector. I installed it in on the railway to the side (right) rail. However, it's inaccurate. It fires 2 feet to the left the laser. I was wondering if there is a way to improve accuracy? can I adjust the angle of the laser somehow?

[Gato]

Originally Posted by heman90210

I recently bought a pressure switch laser for my KWA Kriss vector. I installed it in on the railway to the side (right) rail. However, it's inaccurate. It fires 2 feet to the left the laser. I was wondering if there is a way to improve accuracy? can I adjust the angle of the laser somehow?

Not unless the laser is quality enough to have windage adjustment. you can't really adjust the barrel/hop to fire left or right.

I'll also warn you right now that the likelihood of you being allowed to game that laser is next to zero

[redzaku]

Brand?
There should be adjustment turrets on the device

[waylander]

Depends on the laser. A good one you can adjust both vertically and horizontally, just like with most sights or scopes.



You can see the two screws for adjustment in the pic above. Some will be labeled with V/H some with elevation/windage some with nothing. Some you can't...

[nstahl.19]

I dunno what your guys experiences are but those fake peq boxes lasers are complete shit.

[heman90210]

thx guys, I found the two screws and have been able to hit with pin point accuracy ever since