|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
December 8th, 2012, 15:44
|
#1 |
|
something clanging in my high capa magazine
i got a hellfire high capa recently and after some use i noticed theres clanging in the magazine. i tried to open the magazine but it appears the screwes to open the bottom of the magazines were stripped. anyone got any idea what that clanging is and is there any way to take out the stripped screw?
|
|
|
|
December 8th, 2012, 15:51
|
#2 |
|
probably a copper tube that was attached to the fill valve.
|
|
|
|
|
December 8th, 2012, 15:56
|
#3 |
|
|
any way to fix that? like how do i get rid of a stripped screw out ?
|
|
|
|
|
December 8th, 2012, 15:59
|
#4 |
|
|
Most magazines have 2 pins that you can knock out and take the bottom right off.
|
|
|
|
|
December 8th, 2012, 16:05
|
#5 |
|
|
nope this one is just a screw
|
|
|
|
|
December 8th, 2012, 16:17
|
#6 |
|
|
nvm fixed! thanks guys!
|
|
|
|
|
December 8th, 2012, 16:17
|
#7 |
|
Remove the bottom screw and the lower section will come off from the body. The fill valve tube might have came off and is rattling inside.
__________________
Please email me as I'm not on ASC too often.  Custom Build | Upgrades | Repairs | Maintenance Contact: ghostgunwork@gmail.com / Private Message |
|
|
|
|
December 8th, 2012, 16:34
|
#8 |
|
|
yup it was the valve tube. i stuck it and kinda mallet it back in tight. should i glue it?
|
|
|
|
|
December 8th, 2012, 16:48
|
#9 |
|
aka coachster
|
A dab of crazy glue would work
|
|
|
|
|
December 8th, 2012, 19:40
|
#10 |
|
For a stripped screw, you can either use a dremel and cut a slot in the screw then use a flat head screwdriver, or if it's recessed or you just want to do it a different way you can use a stripped screw remover which is a special tool.
__________________
 Airsoft Sales and Repair/Upgrade Services |
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
