![]() |
|
|
||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
![]() |
|
Thread Tools |
![]() |
#1 |
ACOG 4X scope
Hey guys, im planning to get an ACOG 4X scope for my M4. I prefer one that has good eye relief that can have many reticle types and that is clear.. What would you suggest?
|
|
![]() |
![]() |
![]() |
#2 |
the real steel version doesn't have the greatest eye relief either. i cant see clones being better.
|
|
![]() |
![]() |
![]() |
#3 |
![]() |
"Many reticule types" applies to red dot type optics: the 4x ACOG will have a fixed reticule (usually the ACOG "T" similar to the real one).
![]() realsteel ACOG reticule Eye relief on the real one is extremely short, and is slightly worse on the airsoft clones: expect to have your face about 5cm from the optics.
__________________
|
![]() |
![]() |
![]() |
#4 |
So do all ACOG 4X clones the same or are there better ones?
|
|
![]() |
![]() |
![]() |
#5 |
get an RDS ACOG if you are going for looks. it will also perform very well.
|
|
![]() |
![]() |
![]() |
#6 |
![]() |
There's only a few 4X clones (most went the red dot route) and of those I haven't heard of one being substantially better or worse than the others.
I have one of the ones Huang sells, myself (early ones without markings). Works fine for what it is and the price. Clarity isn't as good as a real one, or real rifle scope, or even my G&P M3 repro, but it's good enough to aim with. It's not a camera lens.
__________________
|
![]() |
![]() |
![]() |
#7 |
Hey does anyone know anything about the A.C.M. ACOG. Is it a good investment?
im putting it on the KJW GBB http://torontoairsoft.com/product.php?id_product=1276 A.C.M. ACOG 4x Scope - $50.00 |
|
![]() |
![]() |
![]() |
#8 |
Price reflects quality, dude. No guarentees
|
|
![]() |
![]() |
![]() |
#9 |
According to what I've managed to read up so far is that G&P's hold recoil. Any other brands out there that can do the same? Any feedback from the field from the guys using G&P's?
|
|
![]() |
![]() |
![]() |
#10 |
I don;t know if that's any good but that acog seems to be a pretty good deal Drew.... i'm kinda tempted...
|
|
![]() |
![]() |
![]() |
#11 |
I had a G&P ACOG 4x, clear glass and solid as a rock. I've dropped it a few times and it's perfectly fine. As for holding recoil, it was on my WE M4 and the thing couldn't shoot as straight as an AEG so I took it off. For the few hundred rounds it was on the GBBR though it held its zero.
On the other hand, the reticle was off by about a degree or so making it canted to the left. It's so slight I didn't actually notice at first and then I assumed it was my mount that was off. I doubt they're all like that, I've got other G&P sights and they're fine for clones so I'm guessing I had a lemon. Eye relief was OK, I can't remember how far your eye had to be but I do remember positioning the sight so it was as far back as possible. Last edited by GSK88; July 19th, 2011 at 12:49.. Reason: Added info |
|
![]() |
![]() |
![]() |
#12 |
From reviews and youtube video there's folks using this on 50 BMG without loss of zero (‪Replica ACOG vs .50BMG‬‏ - YouTube)
Now if you're not running a GBBR, consider the cheaper alternatives. The best way to ID the optic is the same are noted by the ARMS mount, lack of trademark, backup ironsight/ doctOr sight and authentic TA01 reticle http://dragonredairsoft.com/catalog/...products_id=39 http://www.ebairsoft.com/4x32-ta01nsn-base-p-1766.html http://airsoftdepot.ca/catalog/produ...roducts_id=223 Last edited by kullwarrior; July 21st, 2011 at 02:20.. |
|
![]() |
![]() |
![]() ![]() |
|
Bookmarks |
|
|
![]() |