Airsoft Canada - View Single Post

Rookie Ab · April 12th, 2009, 16:35

I have been using 1/4" doweling cut to different lengths to give custom times

but, Max had a better and easier idea.He is using BB's in the place of my dowel

way easier.

I would also like to clarify that I only have done the mods for a handful of buddies.I do not have a source for the head assemblies and spoons, they are hard to come by.

Max will have his mod out very soon, I've heard. Let me tell you ,you will want to mod all of your nades .There's no rush after you pull the pin

as long as your holding the spoon in place :wink:

April 12th, 2009, 16:35	#7
Rookie Ab a.k.a. Kody_1 Trader rating Join Date: Apr 2007 Location: 51° 2′ 42″ N, 114° 3′ 26″ W	I have been using 1/4" doweling cut to different lengths to give custom times but, Max had a better and easier idea.He is using BB's in the place of my dowel way easier. I would also like to clarify that I only have done the mods for a handful of buddies.I do not have a source for the head assemblies and spoons, they are hard to come by. Max will have his mod out very soon, I've heard. Let me tell you ,you will want to mod all of your nades .There's no rush after you pull the pin as long as your holding the spoon in place :wink: __________________ AKA : Rookie, on a few other boards.