Airsoft Canada - View Single Post - G&P M4 Over-hop problem.

Amos · September 1st, 2008, 17:06

So I've got a G&P (Re-built by WGC shop) M4... No matter what I set the Hop to the BB flies out about 20 yards then makes a very sharp curve upwards. (Tried it on .20's, .25's, and .30's.)

The gun fires 335 on .20's

I took everything apart and noticed that the hopup chamber didn't have a spring on it... But apparently some G&P guns don't come with that spring...

My thoughts are that it's due to the missing spring... but that should provide LESS hop... and my problem seems to be TOO much hop.

Any words of wisdom?

September 1st, 2008, 17:06	#1
Amos Trader rating Join Date: Aug 2006 Location: Japan	G&P M4 Over-hop problem. So I've got a G&P (Re-built by WGC shop) M4... No matter what I set the Hop to the BB flies out about 20 yards then makes a very sharp curve upwards. (Tried it on .20's, .25's, and .30's.) The gun fires 335 on .20's I took everything apart and noticed that the hopup chamber didn't have a spring on it... But apparently some G&P guns don't come with that spring... My thoughts are that it's due to the missing spring... but that should provide LESS hop... and my problem seems to be TOO much hop. Any words of wisdom? __________________ Custom Builds: FA3674U Krinkov G3SD6