Airsoft Canada - View Single Post

TokyoSeven · January 31st, 2008, 04:00

Im not versed on the information of CYMA's products, but Im going to go out on a limb and say that your AK should be upgradeable, albiet may not be 100% compatable with TM made parts, that is not to say you can not look to other retailers. A decent spring, spring guide, metal bushings, piston, piston head, cylinder head, airseal nozel, and hopup should bring everything up. But at the cost of parts and the amount of work required to be done, especially if you are not versed in working with the internals of an AEG, its just less painless to purchase the JG or maybe even the Kraken.

January 31st, 2008, 04:00	#7
TokyoSeven Red Wine & Adderall Trader rating Join Date: Oct 2005 Location: Saskatoon, SK	Im not versed on the information of CYMA's products, but Im going to go out on a limb and say that your AK should be upgradeable, albiet may not be 100% compatable with TM made parts, that is not to say you can not look to other retailers. A decent spring, spring guide, metal bushings, piston, piston head, cylinder head, airseal nozel, and hopup should bring everything up. But at the cost of parts and the amount of work required to be done, especially if you are not versed in working with the internals of an AEG, its just less painless to purchase the JG or maybe even the Kraken. __________________ "Its only a little bit on fire"