Airsoft Canada - View Single Post

LaZeDoUt^Jr. · January 29th, 2008, 19:52

Hey everyone.

This is quite annoying. I just received my KSC glock 23f today and shot it. I got about 2 or 3 mags worth out on propane and it worked fine. Now suddenly when i go to push the trigger the hammer wont release. Nothing happens. I took the slide off to see what was wrong, i honestly dont know what to look for. The spring that moves in front of the mag is moving back as i pull the trigger, i dont know why the trigger is not releasing. Any help will be appreciated.

Thanks.

*edit* i just manually got it to release and the trigger got stuck in a down position. I pushed the hammer down and it was back to what it was at a few minutes ago.

January 29th, 2008, 19:52	#1
LaZeDoUt^Jr. Trader rating Join Date: Jun 2004 Location: Richmond Hill/Vaughan, Ontario	glock 23f hammer problem Hey everyone. This is quite annoying. I just received my KSC glock 23f today and shot it. I got about 2 or 3 mags worth out on propane and it worked fine. Now suddenly when i go to push the trigger the hammer wont release. Nothing happens. I took the slide off to see what was wrong, i honestly dont know what to look for. The spring that moves in front of the mag is moving back as i pull the trigger, i dont know why the trigger is not releasing. Any help will be appreciated. Thanks. edit i just manually got it to release and the trigger got stuck in a down position. I pushed the hammer down and it was back to what it was at a few minutes ago. __________________ Feedback Rating http://www.airsoftcanada.com/classif...php?uid=4921 Last edited by LaZeDoUt^Jr.; January 29th, 2008 at 19:59..