Airsoft Canada - View Single Post

Omi-san · January 27th, 2008, 14:16

I took out the metal part from the top of the slide.

All I did was remove the 2 screws holding the rear sight and then I pulled the metal part and cylinder out.

Piece P226-10 and P226-11 fell out. Where and how do I install these 2 back in? the diagram in the TM manual isn't really clear. They are apparently called "return plunger" and "cylinder return spring".

Is it supposed to be in the center between P226-14 and P226-5?

January 27th, 2008, 14:16	#33
Omi-san Trader rating Join Date: May 2007 Location: Montréal	I took out the metal part from the top of the slide. All I did was remove the 2 screws holding the rear sight and then I pulled the metal part and cylinder out. Piece P226-10 and P226-11 fell out. Where and how do I install these 2 back in? the diagram in the TM manual isn't really clear. They are apparently called "return plunger" and "cylinder return spring". Is it supposed to be in the center between P226-14 and P226-5?