|
if you want more consistent shots you should look into mosfet switches. You can get your timing and piston strokes to nearly the same volume of air. This will make your FPS similar and easier to predict your shots. Anymore than this and you'll want to look into a pre-cocking mosfet which will cause your AEG to pre-cock your piston before you pull trigger, like a psg1. Your spring wont last as long (just consider them another wear part, besides you'll wont need to replace your piston too much) but than you'll also have much less vibration and noise while shooting. The guys at airsoft mechanics are developing some switches for this and should be around $50US.
Did I read you correctly, are you going to be shooting at 300FPS?
mateba
|