Airsoft Canada - View Single Post - ICS MP5 + Guarder SP150KIT

crazyguy · December 12th, 2006, 18:39

well the hopup bucking is brand new acctually..

i used it couple minutes ago with another original ics gearbox with a 120 spring and it works perfectly..
so if the ics gearbox runs great it means there is no air leaks in the hopup right?..

and i changed the boreup kit with a normal set and an original ics airnozzle witch is a 1mm larger then Guarder or any other marui air nozzle, i think it works better but still, not 150 M\s how it should..
maybe 120 M\s..

and again about air leaking problems and such, i greased it a few times with sevral grease types,
the guarder cylinder head is no way have leaks in it! its insane how strong it goes into the cylinder it self, and it seems that there is no air leaking at all..

i was thinking about ordering a new systema 6.04 229mm barrel and a new hopup chamber..
but i need to be sure its really the problem.

here is some pic of this set:
http://www.shakel.co.il/guy/sp150.zip

and i tried installing the 120 spring in the sp150 gearbox and still doesnt act like a 120 spring!
it seems to be only a air leak after all..

December 12th, 2006, 18:39	#3
crazyguy Trader rating Join Date: Feb 2006 Location: israel	well the hopup bucking is brand new acctually.. i used it couple minutes ago with another original ics gearbox with a 120 spring and it works perfectly.. so if the ics gearbox runs great it means there is no air leaks in the hopup right?.. and i changed the boreup kit with a normal set and an original ics airnozzle witch is a 1mm larger then Guarder or any other marui air nozzle, i think it works better but still, not 150 M\s how it should.. maybe 120 M\s.. and again about air leaking problems and such, i greased it a few times with sevral grease types, the guarder cylinder head is no way have leaks in it! its insane how strong it goes into the cylinder it self, and it seems that there is no air leaking at all.. i was thinking about ordering a new systema 6.04 229mm barrel and a new hopup chamber.. but i need to be sure its really the problem. here is some pic of this set: http://www.shakel.co.il/guy/sp150.zip and i tried installing the 120 spring in the sp150 gearbox and still doesnt act like a 120 spring! it seems to be only a air leak after all.. Last edited by crazyguy; December 12th, 2006 at 18:42..