Airsoft Canada - View Single Post

Drakker · July 1st, 2016, 12:13

Good luck finding mags that will feed that fast.

High RPS builds are not easy, they require a lot of experience and a LOT of tweaking. If you can't bother to do the research about it yourself, you are clearly not ready to do this build. It's not just putting the parts together, its choosing and trying different parts, using a DSG, calculating air volume, tweaking your tappet plate and nozzle, timing everything, etc.

Also, forget 400 fps at high RPS, its doable, but only the best techs can achieve that. Most high RPS builds shoot under 350 fps for a reason.

Oh, and its unlikely you'll be allowed to use that gun in full auto on the field.

July 1st, 2016, 12:13	#2
Drakker Official ASC Geomorphologist Trader rating Join Date: Sep 2009 Location: Montr?al south shore, Qc	Good luck finding mags that will feed that fast. High RPS builds are not easy, they require a lot of experience and a LOT of tweaking. If you can't bother to do the research about it yourself, you are clearly not ready to do this build. It's not just putting the parts together, its choosing and trying different parts, using a DSG, calculating air volume, tweaking your tappet plate and nozzle, timing everything, etc. Also, forget 400 fps at high RPS, its doable, but only the best techs can achieve that. Most high RPS builds shoot under 350 fps for a reason. Oh, and its unlikely you'll be allowed to use that gun in full auto on the field. __________________ Keep quiet. Sound travels faster than BBs. Québec province's master age verification representative.