Airsoft Canada - View Single Post - Ares Am-013 Amoeba feeding issues

Zfurlong · May 24th, 2015, 21:22

When you insert the mag, it could be your using too much/little force to seat the mag. Could be the mag lip (a little sanding to fix this), could be the too much hop (dial it back), could be the mag not seated properly on the mag catch(wiggle it untill it seats), could be the mag is too loose in the mag well (a little tape should fix this one).
There's any number of reasons for this

May 24th, 2015, 21:22	#2
Zfurlong Trader rating Join Date: Sep 2014 Location: Oromocto	When you insert the mag, it could be your using too much/little force to seat the mag. Could be the mag lip (a little sanding to fix this), could be the too much hop (dial it back), could be the mag not seated properly on the mag catch(wiggle it untill it seats), could be the mag is too loose in the mag well (a little tape should fix this one). There's any number of reasons for this __________________ current armament: mk43, ump.45, p90, barret, m14, g33, k98, m4 tac, m4 swat, mp5 navy, vsr10, p226, m9.