Airsoft Canada - View Single Post

Mobius · April 27th, 2015, 13:23

I just tried a stock spring who is supposed to shoot around 420 FPS, I had 315 FPS... still 15 FPS increase !

And I just found an other problem : Mid cap wont feed well, only high caps.
The problem is the nozzle, after a semi auto cycle, the nozzle is pulled backward. The nozzle blocks the BB from feeding, he is 1 mm too much extended. I solve this problem but putting electrical tape between the hop up and the gearbox. But now I am back to 300 FPS because of this modification.

It seems like, the more you get after market parts, the more you get problems due to incompatibilities.

April 27th, 2015, 13:23	#13
Mobius Trader rating Join Date: May 2010 Location: South Shore, Montreal	I just tried a stock spring who is supposed to shoot around 420 FPS, I had 315 FPS... still 15 FPS increase ! And I just found an other problem : Mid cap wont feed well, only high caps. The problem is the nozzle, after a semi auto cycle, the nozzle is pulled backward. The nozzle blocks the BB from feeding, he is 1 mm too much extended. I solve this problem but putting electrical tape between the hop up and the gearbox. But now I am back to 300 FPS because of this modification. It seems like, the more you get after market parts, the more you get problems due to incompatibilities. __________________ Last edited by Mobius; April 27th, 2015 at 13:25..