Airsoft Canada - View Single Post

paulwes83 · March 14th, 2015, 18:32

Awesome, thanks guys. I am already running a full cylinder and did remove the rubber pad from the Modify cylinder head before gluing on the Sorbo pad. I picked the pad up from Airlab, so hopefully it's good quality. I'll be sure to properly glue the piston rack on once I've removed part of the 2nd tooth.

Even though the pick up tooth isn't at the 12 o'clock position, it does seem to be making full contact with the pick up tooth on the piston at point of contact. I might try slicing off part of the neo pad cause it's about 3-4mm thick at this point, so halving that might give me all I need for perfect AoE.

Thanks for the help guys, much appreciated!

March 14th, 2015, 18:32	#4
paulwes83 Trader rating Join Date: Oct 2006	Awesome, thanks guys. I am already running a full cylinder and did remove the rubber pad from the Modify cylinder head before gluing on the Sorbo pad. I picked the pad up from Airlab, so hopefully it's good quality. I'll be sure to properly glue the piston rack on once I've removed part of the 2nd tooth. Even though the pick up tooth isn't at the 12 o'clock position, it does seem to be making full contact with the pick up tooth on the piston at point of contact. I might try slicing off part of the neo pad cause it's about 3-4mm thick at this point, so halving that might give me all I need for perfect AoE. Thanks for the help guys, much appreciated!