Airsoft Canada - View Single Post

Drakker · January 24th, 2014, 15:53

It generally works well in my experience too, but didn't work so well in my CA MP5K. It would severely overhops 0.28g BBs when the hopup is set at zero shooting at 0.95 joule. Some fitting might be required, in the case of my MP5K the flat-hop style nub needs to be sanded down to reduce the pressure on the rubber. Think about this before buying it, results will vary greatly form one hop-up chamber to another. Also this bucking, just like the REAPS A+ rubbers, might not fit on barrels with a very small hop window.

January 24th, 2014, 15:53	#3
Drakker Official ASC Geomorphologist Trader rating Join Date: Sep 2009 Location: Montr?al south shore, Qc	It generally works well in my experience too, but didn't work so well in my CA MP5K. It would severely overhops 0.28g BBs when the hopup is set at zero shooting at 0.95 joule. Some fitting might be required, in the case of my MP5K the flat-hop style nub needs to be sanded down to reduce the pressure on the rubber. Think about this before buying it, results will vary greatly form one hop-up chamber to another. Also this bucking, just like the REAPS A+ rubbers, might not fit on barrels with a very small hop window. __________________ Keep quiet. Sound travels faster than BBs. Québec province's master age verification representative.