Airsoft Canada - View Single Post

Ninja_En_Short · September 6th, 2013, 18:34

3D printed doesn't mean fragile. Regular JG G36 is made of standard ABS with 2 to 3 mm thick shell at the thinest, still strong, never broke one.

Waiting for an answer from another contact but I already have someone for making it into ABS+ which is more resistant than regular ABS (Cpt Obvious Inside) and the thing is 2mm thick at the thinnest so it should be able to take a decent amount of punishing.

September 6th, 2013, 18:34	#13
Ninja_En_Short Trader rating Join Date: Jul 2007 Location: France, Canada (Montréal)	3D printed doesn't mean fragile. Regular JG G36 is made of standard ABS with 2 to 3 mm thick shell at the thinest, still strong, never broke one. Waiting for an answer from another contact but I already have someone for making it into ABS+ which is more resistant than regular ABS (Cpt Obvious Inside) and the thing is 2mm thick at the thinnest so it should be able to take a decent amount of punishing. __________________ Tous les jours nous nous endormons plus instruits mais pas forcément moins bêtes... I can do a CTRL+ATL+DEL on your gun ! Gun doc in Montreal on AEG, GBB, GBBR and Bolt rifle (gaz and spring) Heavy custom builder (including painting)