Airsoft Canada - View Single Post

Ninja_En_Short · September 6th, 2013, 02:51

Ok, got the MOE rails so I got my specs but that wasn't working with the gun shape so top and bottom rails are integrated in it.

The handguard is a a bit shorter than the regular hanguard, it's 267mm long (don't ask me length in inches you damn imperials !

).
Top rail is 8 spaces, bottom is 22. It's not Picatinny or Mil-1913, I used the STANAG 4694 specification. All equipment are still compatible, it's just the last version.

For the side rails it's using the fixation of the magpul MOE rails, I thought it for use with L3 and L4 sizes, only the front screw locks the position.

The holes under top and lower rail are supposed to be a small detail for venting.

Now to get that thing printed !

September 6th, 2013, 02:51	#5
Ninja_En_Short Trader rating Join Date: Jul 2007 Location: France, Canada (Montréal)	Ok, got the MOE rails so I got my specs but that wasn't working with the gun shape so top and bottom rails are integrated in it. The handguard is a a bit shorter than the regular hanguard, it's 267mm long (don't ask me length in inches you damn imperials ! ). Top rail is 8 spaces, bottom is 22. It's not Picatinny or Mil-1913, I used the STANAG 4694 specification. All equipment are still compatible, it's just the last version. For the side rails it's using the fixation of the magpul MOE rails, I thought it for use with L3 and L4 sizes, only the front screw locks the position. The holes under top and lower rail are supposed to be a small detail for venting. Now to get that thing printed ! __________________ Tous les jours nous nous endormons plus instruits mais pas forcément moins bêtes... I can do a CTRL+ATL+DEL on your gun ! Gun doc in Montreal on AEG, GBB, GBBR and Bolt rifle (gaz and spring) Heavy custom builder (including painting)