|
Working on mechboxes is fairly simple after the first time, but even though I've worked on a lot of different guns including a CA M14 which follows a similar design to the G&G, I found the G&G much more difficult to get back together due to the retarded design of the anti reversal latch and bevel gear. If you're mechanically minded you should be fine, it will be a matter of how long it takes to get it back together as opposed to whether or not you will get it back together.
Also be warned to take the cutoff lever off before taking the mechbox apart, this particular mechbox has that as a very weak point if the gears run in reverse, which is what happens if you take your mechbox apart or release your anti reversal latch without manually resetting the spring.
|