Airsoft Canada - View Single Post

ThunderCactus · May 29th, 2013, 11:17

I have a feeling the microswitches in them are of particularly poor quality
I have one on my bench right now that has a burned out microswitch due to use of an 11.1v lipo

Gun works fine if i plug the lipo right to the motor, gun acts like the battery is dead if I go through the microswitch. No wiring problems. Switch seems to have arced, either through normal use or more likely from boucne, and is super dirty, only you can't clean it BECAUSE ITS A MICROSWITCH -_-

Hate microswitches.

May 29th, 2013, 11:17	#2
ThunderCactus Not Eye Safe, Pretty Boy Maximus on the field take his picture! Trader rating Join Date: Feb 2007	I have a feeling the microswitches in them are of particularly poor quality I have one on my bench right now that has a burned out microswitch due to use of an 11.1v lipo Gun works fine if i plug the lipo right to the motor, gun acts like the battery is dead if I go through the microswitch. No wiring problems. Switch seems to have arced, either through normal use or more likely from boucne, and is super dirty, only you can't clean it BECAUSE ITS A MICROSWITCH -_- Hate microswitches.