|
check videos on youtbue on how to open the mechbox and where to put your fingers.
When closing the box, you can use tweezers to hold the anti reversal latch in position by clamping it to the box frame.
take a photo when opening the mechbox.
closing the box:
-hold the spring/piston/cylinder together in position with one hand
-lay down the box's side onto the mechbox, switch fingers to keep holding the cylinder/spring through the cyldinder's window on the mechbox's frame
-adjust gear axes into holes ( with a flat screwdriver), latch's axis into its hole.
-check the nozzle movement
if possible test the mechbox's function before putting the gun back together.
__________________
|