Quote:
Originally Posted by FeaR Da Allstar
I'm currently running the stock trigger group. Everything was tightened down including the buffer retention pin. In addition I tried some of Turok's mods. Unfortunately it still gets stuck, albeit is a little more smooth in operation.
Charging handle is still unbelievably hard to pull back.
|
The auto-sear in the trigger box might be rubbing against the RATech bolt carrier, this is also a known issue.
Try taking out the trigger box and take out the auto-sear then pull the charging handle to see if this is the issue. OR you can check for wear on the bottom of the RATech bolt carrier caused by the auto-sear.
If this is the cause, you need to modify the auto sear a bit narrower.