Quote:
Originally Posted by generichandle
Hey so I have a g&p which hasn't been fielded yet due to fps, looking to swap to a m90 to allow winter time indoor cqb goodness. I want to do an initial upgrade along with the new spring, nothing crazy as I'm running the stock gearbox until it shits the bed.
Planning on throwing in a Prometheus bridge hop up tensioner http://www.airsoftstore.ca/index.php...roducts_id=179 paired with a lonex 50d bucking. http://www.airsoftstore.ca/index.php...products_id=78
And a sorob pad http://www.airsoftstore.ca/index.php...&products_id=7 just wondering if I should up to a 70 or grab a neo aswell,, maybe make the jump to a p.o.m piston head? If absolutely necessary?
Just ideas from a noob needing advice, sound good? Sound bad? Not trying to upgrade the gearbox yet as would rather just throw in a full lonex when the stock g&p eats shit.
Any suggestions or insight greatly appreciated |
I wouldn't waste your time on the sorbo pad or the hopup changes or any of the other changes except the spring.
If you're not running 11.1V LiPos and you're playing indoors on semi-auto only, you will not need the sorbo pad. Correcting AoE isn't as urgent when you're not running a high powered setup at a high RoF.
If you're only playing indoors, you will not need any changes to your hopup. The stock G&P stuff is actually perfectly fine.
In other words, you don't really need to change anything except for the spring. With an M90 spring in there, you might also luck out and not have a trademark G&P gear failure for a long time.
Hope that helps