Airsoft Canada - View Single Post

Cobrajr122 · September 6th, 2012, 18:17

I am not to worried about the air line :P
Thanks though!

I am more worried about the FCU/LiPo flopping about in that massive stock, makes a lot of noise and the FCU cable is not quite long enough to get it out of the stock for access to the battery connectors.
Time to buy a replacement stock :P

Looks like I'll have to do the Heat shrink mod on the selector plate as well, I can only get semi out of it. Oh well, I knew that might be an issue going into it.

She shoots GREAT though, I can't wait to get the hopup, rubber, and barrel switched out to a full Promi setup.

Edit:

Fixed auto, results....

September 6th, 2012, 18:17	#30
Cobrajr122 2 Cent Tactical Trader rating Join Date: Apr 2006 Location: NB	I am not to worried about the air line :P Thanks though! I am more worried about the FCU/LiPo flopping about in that massive stock, makes a lot of noise and the FCU cable is not quite long enough to get it out of the stock for access to the battery connectors. Time to buy a replacement stock :P Looks like I'll have to do the Heat shrink mod on the selector plate as well, I can only get semi out of it. Oh well, I knew that might be an issue going into it. She shoots GREAT though, I can't wait to get the hopup, rubber, and barrel switched out to a full Promi setup. Edit: Fixed auto, results.... __________________ www.2centtac.com F i n d - a n - A g e - V e r i f i e r Last edited by Cobrajr122; September 8th, 2012 at 23:28..