Airsoft Canada - View Single Post

Dynamo · March 29th, 2012, 13:07

assuming the AKM ACR uses the same shit ARES gearbox with that ridiculous switch, a computerized mosfet is out of the question. at least not without doing extensive modifications to the gearbox shell. a basic mosfet might work. if you are going to be opening her up, check the gears and cylinder. i worked on an ACR with warped deformed gears, and a cylinder that had the inside wall scratched to shit due to the crap piston over sized metal tooth.

March 29th, 2012, 13:07	#5
Dynamo Harvester of Noobs' Sorrow Trader rating Join Date: Oct 2003 Location: T̆͒ͥ̓̿̅̈́̐͊̿͗̐̾̃͐ͧ&#8	assuming the AKM ACR uses the same shit ARES gearbox with that ridiculous switch, a computerized mosfet is out of the question. at least not without doing extensive modifications to the gearbox shell. a basic mosfet might work. if you are going to be opening her up, check the gears and cylinder. i worked on an ACR with warped deformed gears, and a cylinder that had the inside wall scratched to shit due to the crap piston over sized metal tooth. __________________ Weapons Technician / Gunsmith Don't look at me, I don't know, lol ¯\(°_o)/¯.