[Brayden]

Originally Posted by Brian McIlmoyle

you have to take the front end of the gun off, the gas block and fore sight assembly

Originally Posted by N_Force

push and remove pin from this side
http://www.airsoftcanada.com/picture...pictureid=3799

unscrew half the way
http://www.airsoftcanada.com/picture...pictureid=3803

then holding the flashhilder and front sight and pull it out(you may have to pull harder at the first time), be careful, don't bend the inner barrel.

Originally Posted by TPM001

Weird. I thought I covered this?!? Check out post #101 of this thread. Its loaded with pics too!

Let me know if it's not clear and I'll help ya out.

Shii dunno how I missed this, anyways i've already done all of the above mine is really stuck on there... I've even went at it with a hammer, removed nearly every pin in the whole gun haha, im going to have someone pull as I tap it with a hammer maybe then it'll come off lol.



Also if you guys havn't tried it yet, put your finger at the top of the trigger and bump fire it hahaha, ive been able to get of 6-7 rounds in the cold, tons of fun if your not target shooting.