Quote:
Originally Posted by Lumi
Look at the pictures attached, I've circled the selector lever end in red. After using the forward assist and before firing the gun crack it open and look at this lever end, with the gun open and the battery out put the gun to Semi and squeeze the trigger, does the white plastic piece go over or under the metal tab on the selector lever? It may be that the gears are pushing on this after they reverse and lifting it just enough to be switching it to full auto for the first shot.
How it might look
How it should look
I'm still trying to figure out how to correct this if that is the problem, but if it is we've at least got it narrowed down. |
DING DING DING!
That is the reason why it would cause your issue.
Happens to most ICS rifles that are properly adjusted.
Thge trick is to remove half a millimeter off the trigger block (the part that moves) to let the cut-off lever fall down as it should.