Quote:
Originally Posted by Darklen
You're missing the lock from the dust cover. If you want it to stay closed you'll either have to reverse the spring (meaning you'll have to pry and hold it open when you need to adjust your hopup) or replace the dust cover.
|
The lock (at least I think this is what you are referring to) was removed so that I could show you that I had replaced the spring with the little piece of blue silicone band. So, after the picture was taken, I re-installed the lock and the dust cover remains closed unless I pull the handle back to release it. So, with this fix, I don't need to reverse the main dust cover spring to keep it closed.
Sorry, but reversing the main spring doesn't seem like a very good solution as it makes it more difficult to adjust the hopup.