|
Got my tanaka in yesterday,
Boy i should of listened to everyone here.
The bolt is the most retarded thing in this gun, mostly plastic, waiting to brake. I reinforced the hole thing with steel epoxy.
The barrel had a 2 inch wobble in to it. Took it all apart. The loading part of the barrel is made out of cheap plastic. Very easy to brake and hard to take apart. that to has been reinforced with steel epoxy.
The 2 pines at the bottom of the receiver are to small. I taped 2 screws instead and lock tight the hole thing.
After about 10 hours of work there is no more wobble in the barrel.
for the racking handle its an easy fix. You just need to tighten the tube that holds the thing onto the brackets.
Over all. Its really not worth the money.
There are no replacement parts for the bolt, and the only thing that will work is RS trigger groups. It may work for a year or for 2 days but will eventually brake again.
|