Quote:
Originally Posted by ronin49v
I got a TM stock and a G&G stock gearbox, which would be the better one to upgrade with better hi speed systema gears, cylinder, cylinder head, TM Piston ,120 spring and powered by a TM EG1000 motor.
Right now thats all I'm planning to upgrade.
|
G&G would be the better option, I personaly have one with 8mm bearings and its a nicely built gear box. Not as heavy of a build as a systema or a new CA v2, but it should a prove to be stronger than the TM v2 shell. Plus as stated before, its got bearings. Not the best bearings out there ( try kanzen bearings ) but from first hand experience they will handle a modify s-120+ wich is stronger than 90% of the other m-120 springs out there ( 448 fps- non bore up). On a side note, the bearings will handle the s-120+ spring.....however the piston head will not lol.
-Ryan
__________________
All right, they're on our left, they're on our right, they're in front of us, they're behind us... they can't get away this time!
- Lieutenant General Lewis B."Chesty" Puller (when surrounded by 8 enemy divisions)
Born to fight, trained to kill, ready to die, but never will.
|