Airsoft Canada - View Single Post - Army MEU ( R27 ) Review & Compatibility Report

juicy · February 9th, 2010, 18:18

Update 1: I just came back to my new MEU to discover that the fill valve-area had sprung a leak. The reason? Destroyed O-ring between the base plate and the fill valve. Unfortunately, it doesn't look like any of the included extra O-rings fit here... Time to steal a fill valve from another clone!

Update 2: Yup, still looks to be a copy of the TM MEU. Includes shock buffer. Also, after a days worth of racking the slide and such, the hammer is showing signs of wear, from where its striking the rear of the BBU from racking the slide with a dropped hammer. The trigger could probably use an adjustable trigger stop, as there is quite a bit of overtravel still (is that what its called, again?).

February 9th, 2010, 18:18	#2
juicy Trader rating Join Date: Nov 2009 Location: Richmond, BC	Update 1: I just came back to my new MEU to discover that the fill valve-area had sprung a leak. The reason? Destroyed O-ring between the base plate and the fill valve. Unfortunately, it doesn't look like any of the included extra O-rings fit here... Time to steal a fill valve from another clone! Update 2: Yup, still looks to be a copy of the TM MEU. Includes shock buffer. Also, after a days worth of racking the slide and such, the hammer is showing signs of wear, from where its striking the rear of the BBU from racking the slide with a dropped hammer. The trigger could probably use an adjustable trigger stop, as there is quite a bit of overtravel still (is that what its called, again?). Last edited by juicy; February 10th, 2010 at 18:06..