|
1- Remove the rear body pin.
2- Lift the rear part of the body open.
3- Remove the upper mechbox.
4- Check for damaged piston (It should be almost perfect, mostly the rearmost teeth).
5- Plug the battery and press the trigger. You should see the gears spinning.
6- There is TWO screws for height adjustment on newer ICS rifles. Remove the first one COMPLETELY, then you have access to the second one.
7- Fully screw the adjustment, then remove 1/2 turn. Test and check for high pitch noise (no grinding, just high pitch). If the gun sound high pitched, unscrew by 1/8 turn increment. If it makes a lower pitched grinding noise, screw in 1/8 at the time.
8- If it still does not work, send it to your local gundoc (or to me if you are near Montreal).
__________________
Quote:
Originally Posted by Drake
Damnit, don't make me add "no discussing temporal paradoxes" to the rules or I'll go back in time and ban you last week.
|
|