Airsoft Canada > Search Forums Search Results			User Name Remember Me? Password

Showing results 1 to 39 of 39 Search took 0.01 seconds. Search: Posts Made By: Flarebrass

Forum: Doctor's Corner April 9th, 2015, 15:19

Replies: 2 GGB Pistols: Aluminum Nozzle VS Plastic Nozzle? Views: 4,268 Posted By Flarebrass Thanks for the reply! Thanks for the reply!

Forum: Doctor's Corner April 8th, 2015, 16:33

Replies: 2 GGB Pistols: Aluminum Nozzle VS Plastic Nozzle? Views: 4,268 Posted By Flarebrass GGB Pistols: Aluminum Nozzle VS Plastic Nozzle? Hey guys, did some quick searches to try and find some info on this subject, but it didn't seem to come up with this exact questions (some on GBBR's, some on normal AEG nozzles and such, but not...

Forum: Upgrades & Modifications January 26th, 2015, 15:45

Replies: 21 Troubleshooting New Build 2.0: Opinions Requested! Views: 10,904 Posted By Flarebrass So I gamed this rifle at Ultimate Airsoft in... So I gamed this rifle at Ultimate Airsoft in Toronto this past weekend with the grip change (stock VFC 416 grip) and it fires amazing now. Little to no grind. I will be tinkering to see if I can get...

Forum: Upgrades & Modifications January 22nd, 2015, 16:37

Replies: 21 Troubleshooting New Build 2.0: Opinions Requested! Views: 10,904 Posted By Flarebrass http://i.imgur.com/0Xnx4Ix.jpg Above is how... http://i.imgur.com/0Xnx4Ix.jpg Above is how I do my test. Notice the red line is parallel where it should be. The green line is when I have the motor installed and in correspondence to this...

Forum: Upgrades & Modifications January 22nd, 2015, 16:08

Replies: 21 Troubleshooting New Build 2.0: Opinions Requested! Views: 10,904 Posted By Flarebrass The cam is circular and the release tooth is... The cam is circular and the release tooth is bigger. I guess it is gen 1 haha. The bevel, on the fat side, is as close to the gearbox as it can be (ended up with 1 shim, then no shims just to...

Forum: Upgrades & Modifications January 22nd, 2015, 14:23

Replies: 21 Troubleshooting New Build 2.0: Opinions Requested! Views: 10,904 Posted By Flarebrass Don't know about the Siegeteks. this is where I... Don't know about the Siegeteks. this is where I bought them from. http://www.airsoftstore.ca/index.php?main_page=product_info&cPath=35_5&products_id=216

Forum: Upgrades & Modifications January 22nd, 2015, 14:00

Replies: 21 Troubleshooting New Build 2.0: Opinions Requested! Views: 10,904 Posted By Flarebrass @pestobanana The MOE grip is a gen 2. I just wish... @pestobanana The MOE grip is a gen 2. I just wish it worked with this set up lol.

Forum: Upgrades & Modifications January 22nd, 2015, 10:22

Replies: 21 Troubleshooting New Build 2.0: Opinions Requested! Views: 10,904 Posted By Flarebrass @pestobanana So I did what you said and put on... @pestobanana So I did what you said and put on the original 416 grip that I had lying around. This drastically reduced the grinding overall. With a little fiddling, I can probably make it even...

Forum: Upgrades & Modifications January 21st, 2015, 17:50

Replies: 21 Troubleshooting New Build 2.0: Opinions Requested! Views: 10,904 Posted By Flarebrass @lurkingknight I know exactly what you are... @lurkingknight I know exactly what you are saying. It IS off axis but I cannot shim it any lower as I have tested it with no shims on the fat side and it still pushes it off axis. Bevel gear is...

Forum: Upgrades & Modifications January 21st, 2015, 15:37

Replies: 21 Troubleshooting New Build 2.0: Opinions Requested! Views: 10,904 Posted By Flarebrass @Shamusodoofus All bearings seems to be in... @Shamusodoofus All bearings seems to be in running condition; no cracks or breaks. They also all sit flush to the gearbox. Also to clarify, I replaced the bevel with another one that was exactly...

Forum: Upgrades & Modifications January 21st, 2015, 10:45

Replies: 21 Troubleshooting New Build 2.0: Opinions Requested! Views: 10,904 Posted By Flarebrass Troubleshooting New Build 2.0: Opinions Requested! Hello ACS Community!, So I am back for a second round of a high end build I am doing. I used everything I learned from my previous builds to this date, including my other troubleshooting thread,...

Forum: Upgrades & Modifications April 8th, 2014, 09:33

Replies: 64 Troubleshooting new build: Opinion requested! Views: 37,604 Posted By Flarebrass **UPDATE** So, after feeling like a newb, I... **UPDATE** So, after feeling like a newb, I realized that sometimes going back to the basics and looking for the simple solution is the way to go, instead of looking for some big bad answer to a...

Forum: Upgrades & Modifications March 27th, 2014, 09:21

Replies: 64 Troubleshooting new build: Opinion requested! Views: 37,604 Posted By Flarebrass Update: Ok so I made a video of what was... Update: Ok so I made a video of what was happening (and I was working on it last night without the cylinder or piston in), but it is very blurry and frankly, I am having a hell of a time trying to...

Forum: Upgrades & Modifications March 25th, 2014, 15:14

Replies: 64 Troubleshooting new build: Opinion requested! Views: 37,604 Posted By Flarebrass @Pestobanana: That is a great idea. I will try... @Pestobanana: That is a great idea. I will try that when I work on it next! I am unfortunately still at work and haven't had time to get back at it yet, and I have a team meeting tonight so I...

Forum: Upgrades & Modifications March 25th, 2014, 14:12

Replies: 64 Troubleshooting new build: Opinion requested! Views: 37,604 Posted By Flarebrass @Pestobanana: Just to clearify, when I put the... @Pestobanana: Just to clearify, when I put the 14:09's back in, the jamming ceases to exist and the issue is that when the trigger is pulled, it does not fire. It does seem though, that it is a...

Forum: Upgrades & Modifications March 25th, 2014, 13:35

Replies: 64 Troubleshooting new build: Opinion requested! Views: 37,604 Posted By Flarebrass @Pestobanana: Negative. It stops working on both.... @Pestobanana: Negative. It stops working on both. I will try to take a video when I am working on it next. Thanks, Flarebrass

Forum: Upgrades & Modifications March 25th, 2014, 11:08

Replies: 64 Troubleshooting new build: Opinion requested! Views: 37,604 Posted By Flarebrass @Pesto: Had it working 100% with the 14:09's but... @Pesto: Had it working 100% with the 14:09's but the nozzle wouldn't go far enough back due to the longer tappet plate. I ordered the new tappet plate and while I was at it said "hey, lets try the...

Forum: Upgrades & Modifications March 25th, 2014, 10:09

Replies: 64 Troubleshooting new build: Opinion requested! Views: 37,604 Posted By Flarebrass On a side note; think it would have something to... On a side note; think it would have something to do with the trigger sled post? Ill check that as well when I am back inside.

Forum: Upgrades & Modifications March 25th, 2014, 10:07

Replies: 64 Troubleshooting new build: Opinion requested! Views: 37,604 Posted By Flarebrass @Pestobanana: I will give that a shot either... @Pestobanana: I will give that a shot either later tonight or tomorrow without the piston/cylinder installed to see what happens with the sled. It HAS to be a connection issue somewhere which is why...

Forum: Upgrades & Modifications March 25th, 2014, 00:01

Replies: 64 Troubleshooting new build: Opinion requested! Views: 37,604 Posted By Flarebrass @pestobanana: meant .1mm heh sorry for the... @pestobanana: meant .1mm heh sorry for the mis-info. I just checked the connections as you mentioned and it did it again. When I close the box with everything in place, and attach the motor to the...

Forum: Upgrades & Modifications March 24th, 2014, 22:07

Replies: 64 Troubleshooting new build: Opinion requested! Views: 37,604 Posted By Flarebrass @Pestobanana: I test each gear to get about... @Pestobanana: I test each gear to get about a mm play using multiple shim guides online and then test them all together. They turn beautifully multiple times before stopping when they are...

Forum: Upgrades & Modifications March 24th, 2014, 21:20

Replies: 64 Troubleshooting new build: Opinion requested! Views: 37,604 Posted By Flarebrass Ok so I put the 14:09's back in, close everything... Ok so I put the 14:09's back in, close everything up, fit is great and everything is in place. Pull the trigger and nothing. Wont connect the circuit or anything, motor wont turn, battery isn't even...

Forum: Upgrades & Modifications March 24th, 2014, 13:07

Replies: 64 Troubleshooting new build: Opinion requested! Views: 37,604 Posted By Flarebrass @Lurking: Assuming that the 14:09's are right on... @Lurking: Assuming that the 14:09's are right on the limit and are the causing factor to this issue, your idea of stacking batteries does make sense, but having limited space on an M4 platform...

Forum: Upgrades & Modifications March 24th, 2014, 12:52

Replies: 64 Troubleshooting new build: Opinion requested! Views: 37,604 Posted By Flarebrass @Kokanee: I understand your method! Stock guns... @Kokanee: I understand your method! Stock guns don't break as easily and for the most part run for quite a while before you have to open them up. This I understand. However, my goal and purpose of...

Forum: Upgrades & Modifications March 24th, 2014, 12:28

Replies: 64 Troubleshooting new build: Opinion requested! Views: 37,604 Posted By Flarebrass Hello again guys, Thanks for all the help. I... Hello again guys, Thanks for all the help. I love these forums for this kind of stuff! @Varjeal & Stealth: I did try this and it is actually from steath, the 2nd piston mentioned in that video...

Forum: Upgrades & Modifications March 24th, 2014, 09:14

Replies: 64 Troubleshooting new build: Opinion requested! Views: 37,604 Posted By Flarebrass Sure, I have 3 Turnigy Nano-tech 11.1v 1100mah (1... Sure, I have 3 Turnigy Nano-tech 11.1v 1100mah (1 15c 2 25c) batteries and one no name battery that is 11.1v 1100mah 15c.

Forum: Upgrades & Modifications March 24th, 2014, 08:46

Replies: 64 Troubleshooting new build: Opinion requested! Views: 37,604 Posted By Flarebrass Hey guys, It seems I have solved the tappet... Hey guys, It seems I have solved the tappet plate issue and modified a SHS nylon tappet plate that is shorter than the stop lonex one and fits pretty good. I am now however, experiencing another...

Forum: Upgrades & Modifications March 13th, 2014, 11:40

Replies: 64 Troubleshooting new build: Opinion requested! Views: 37,604 Posted By Flarebrass Hey Stealth!, Very true it seems. I guess it was... Hey Stealth!, Very true it seems. I guess it was the longer version (I bought the shell from you as well haha). Do you have any lonex tappet plates of the new sort kicking around that you could send...

Forum: Upgrades & Modifications March 12th, 2014, 08:30

Replies: 64 Troubleshooting new build: Opinion requested! Views: 37,604 Posted By Flarebrass So just an update for anyone who may come across... So just an update for anyone who may come across these forums looking for an answer. I have messed around with the gearbox a bit more and also finally found some information hidden on the 7th page of...

Forum: Upgrades & Modifications March 5th, 2014, 09:17

Replies: 64 Troubleshooting new build: Opinion requested! Views: 37,604 Posted By Flarebrass So I removed the stock VFC hop up from the rifle... So I removed the stock VFC hop up from the rifle and added a ProWin hop up and the nozzle is still protruding a bit. I shaved it down a bit, but its still in the hop up unit by about 3mm or so. I...

Forum: Upgrades & Modifications February 25th, 2014, 10:57

Replies: 64 Troubleshooting new build: Opinion requested! Views: 37,604 Posted By Flarebrass @pestobanana: Yes for sure. Ill double check the... @pestobanana: Yes for sure. Ill double check the nozzle and maybe even throw in the original VFC tappet plate and nozzle and see what kind of difference it makes. Thanks again for the help! ...

Forum: Upgrades & Modifications February 25th, 2014, 08:17

Replies: 64 Troubleshooting new build: Opinion requested! Views: 37,604 Posted By Flarebrass @pestobanana: So I had a few minutes last night... @pestobanana: So I had a few minutes last night and tried feeding one bb into the chamber to see if it took. It did not, and every time i shot it moved a little, but never actually went into the...

Forum: Upgrades & Modifications February 24th, 2014, 16:07

Replies: 64 Troubleshooting new build: Opinion requested! Views: 37,604 Posted By Flarebrass @pestobanana: I agree, I have 2 other rifles, and... @pestobanana: I agree, I have 2 other rifles, and the SHS nozzles work fine in them as well. One is a G&P and the other a VFC. I will do the manual bb by hand when I have some time and see if it goes...

Forum: Upgrades & Modifications February 24th, 2014, 15:44

Replies: 64 Troubleshooting new build: Opinion requested! Views: 37,604 Posted By Flarebrass @wind_comm: I used a cutting edge on a dremel.... @wind_comm: I used a cutting edge on a dremel. for all 3 it took me about 10-15 minutes. @K3vX: Unfortunately I do not have a lower battery as I only have 11.1's and rifles. I do not believe it...

Forum: Upgrades & Modifications February 24th, 2014, 12:42

Replies: 64 Troubleshooting new build: Opinion requested! Views: 37,604 Posted By Flarebrass Hey Lurking, No problem. Maybe if I... Hey Lurking, No problem. Maybe if I clarified a little better it would help. When I shoot in semi, wherever the nozzle was, is where it ends up. It only changes position (middle, forward, back,...

Forum: Upgrades & Modifications February 24th, 2014, 12:07

Replies: 64 Troubleshooting new build: Opinion requested! Views: 37,604 Posted By Flarebrass Hey K3vX, I was quite fearing pre engagement... Hey K3vX, I was quite fearing pre engagement as well. That is why I went with 3 teeth and upped the spring! In regards to mags & bb's, It was an Emag PTS + .25 Bioval bb's. What do you...

Forum: Upgrades & Modifications February 24th, 2014, 11:59

Replies: 64 Troubleshooting new build: Opinion requested! Views: 37,604 Posted By Flarebrass Hey Lurk, That is what I did! (your first... Hey Lurk, That is what I did! (your first sentence differs from your second, so I am going off what i read). When I did my short stroking research, the guides I used said to take teeth off the...

Forum: Upgrades & Modifications February 24th, 2014, 10:37

Replies: 64 Troubleshooting new build: Opinion requested! Views: 37,604 Posted By Flarebrass Reserved. **Also please note: the PiccoSSR 2... Reserved. **Also please note: the PiccoSSR 2 mosfet is a NON-Active Breaking mosfet**

Forum: Upgrades & Modifications February 24th, 2014, 10:28

Replies: 64 Troubleshooting new build: Opinion requested! Views: 37,604 Posted By Flarebrass Troubleshooting new build: Opinion requested! Hello ACS Community!, I have a question for you guys! I have been getting better and better with AEG upgrades and mods, and I am always wanting to know more about them to enhance the performance...

Showing results 1 to 39 of 39