Airsoft Canada - I wanna upgrade my CA M24 socom sniper

Ghillie, I'm surprised yo udidn't point him my way! Lol ya bum!!!

From my sniper section on the team forum (all shown from the WGC site):

Quote:

Originally Posted by Stalker

Here's the manual for the CA M24 V2:

http://www.classicarmy.com/showcatal...?acid=111&pg=1

Upgrading to 450fps, I'd recommend these parts (you will need an upgraded cylinder for it, not sure if stock will work with these parts):

Guarder:

Ultra-light Piston for APS2

http://www.wgcshop.com/WGC_Shop/imag...ps2_03_low.jpg

Piston head for APS2

http://www.wgcshop.com/WGC_Shop/imag...ps2_02_low.jpg

7mm bearing spring guide for APS2

http://www.wgcshop.com/WGC_Shop/imag...s2_04a_low.jpg

Clear Hop Up & Bucking rubber

http://www.wgcshop.com/WGC_Shop/imag...ge0701_low.jpg

First Factory/Laylax:

PSS2 130SP Spring

http://www.wgcshop.com/WGC_Shop/imag..._130sp_low.jpg

Prometheus:

6.03mm 534mm tightbore barrel (needs to trim off about 19mm to make it fit right)

http://www.wgcshop.com/WGC_Shop/imag...barrel_low.jpg

All the above is what I have in my M24 (I have a different spring though, as well as the 9mm spring guide). That spring should give you about 425fps with 0.20g BBs, the tightbore will add another 10fps, and the bearing spring guide another 15fps, bringing you around 450fps.