![]() |
CA G36k Takedown Guide.
Hey guys, I've been having some trouble dis assembling my G36k, I'm at the point were I want to remove the lower reciever from the upper, but it won't seem to come out like in the guide I've seen, if someone could make a simple picture guide it would really help >.<
|
Is the selector on semi? I find it's a LOT easier to get out on semi.
Here's mechbox.com's http://www.mechbox.com/site/upgrades...bly-video.html and the other one I use (method 2) http://pageproducer.arczip.com/daedalus03/g36chop.html |
Heh, I found what was wrong, I forgot about the screw that is located at the back of the gun, were the stock attaches >.<
|
LOL, that happened to me occasionally, too. ;) At least the G36's easy to takedown once you remember all (2) bolt/screw, that's one of the thing I really miss about it now that I've switched to a M14.
|
Yes, the take down on G36's is very easy :)
Btw, does anyone know were I can order a replacement mag well pin+screw head? It was the first thing to go (oddly enough) on my G36k. I probably tightened it to much, then scraped it against a tree, because the screw head ripped the end of the pin (the part the screw head attaches to). It's still a very tight fit so I'm not worried about loosing the pin, I just need a replacement sometime. I'm also looking at buying an XM8 body, any one have input on what one is the best so far? I head the GunsWorkShop one is pretty good... |
Contact JAFA, the part number is GC-6, the nut and bolt comes as a set. Should be around $11US after shipping, I know all of this because I almost got some from JAFA but my lack of a paypal account stopped me. I'd get two or more, if you can. They're pretty rare in Canada, if you get my drift.
Considering the price, quality and availability of a GWS conversion kit, you might as well get a SRC XM8. :rolleyes: |
Quote:
|
|
Quote:
|
All times are GMT -4. The time now is 11:00. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.